Recently Viewed
Welcome
PayPal

Verona Cast Iron Radiator 800mm

Verona Cast Iron Radiator 800mm
  Zoom
 Verona Cast Iron Radiator 800mmVerona Cast Iron Radiator 800mm 
Our Price:  £52.50(Inc. 20% VAT)(£43.75 Exc. VAT)Earn 52 Loyalty Points
+
Radiator Section:
Radiator Finish:
Carron Luxury Bleed Valves:

Brand:  Radiators

The Carron Verona 800mm is a stunning cast iron radiator, this truly remarkable design combines cherubs, dragons and lions entwined together with vines running throughout the decoration.

Our Cast Iron Radiators are available primed or in a wide selection of paint and special finishes.

Period House Store Carron radiators now come with a lifetime warranty.

  • Primed                                          £52.50  Inc VAT
  • Painted                                         £59.70 Inc VAT
  • Antique/Highlight/Bare Metal     £67.50 Inc VAT
  • Full/Satin Polish                          £94.00 Inc VAT



Special Offer:  A discount of 5% is available when you order £3,000.00 or more from this category.

• Lifetime Guarantee
• Pressure Tested to 10 Bar
• Supplied Fully Assembled
• Colour Match Service

We believe our radiators are the highest quality available in the UK and have been featured on DIY SOS and supplied to Chatsworth House and to clients including Sir Ian Botham and Gabby Logan.
We have been selling Cast Iron Radiators for over 10 years and have built up extensive knowledge. We are more than just a website, you can order on-line but are welcome to contact our sales department for any assistance you need. Cast Iron radiators are an investment and we recommend using ourselves to make sure you receive the right product at the right price and most importantly the best quality castings and finish available in the UK.


Have a Question about this product or any other product?

Why not drop us a quick message on our contact us page and we will get back to you within 24 hours.

Or call us now to discuss your requirments on: 01748 821 500

 

Verona 650mm

A - 650mm
B - 200mm
C - 480mm
D - 110mm
E - 215mm
F - 63mm
F = Section Width

 

BTU Output  - 324

Watts Output  - 95

Verona 800mm

A - 800mm
B - 200mm
C - 640mm
D - 110mm
E - 215mm
F - 62mm
F = Section Width

 

BTU Output  - 488

Watts Output  - 143

Verona 940mm

A - 940mm
B - 200mm
C - 780mm
D - 110mm
E - 215mm
F - 67mm
F = Section Width

 

BTU Output  - 547

Watts Output  - 160

 

 

 

 

 

 

 

 

 

 

 

 

 

Our figures are based on Delta 60 which relates to standard Hot Water Heating Systems (for any advice on outputs for different heating systems, please contact the sales office on 01748 821500).

Carron have provided a selection of Luxury Bleed Valves to further accessorize your Cast Iron Radiator and complement your other accessories. The Luxury Bleed Valves available so far include Brass, Chrome and Satin Nickel (these are only optional so you can still have standard bleed valves as an option).

                    

                                               Brass Bleed Valves                                          Chrome Bleed Valves                                  

                                                                

                                                                        Satin Nickel Bleed Valves

We are transparent with our delivery costs, many companies offer free delivery and inflate the price of their goods, we prefer to offer the best price we can on the products and also offer the best prices on delivery we can. In the main we offer a two teir delivery system. Palletised deliveries and standard courier deliveries. Our palletised deliveries are £50 and standard courier delivery is £12 both include VAT. Items such as kitchens are variable and we quote this separately. Charges to remoter parts of Scotland, Northern Ireland and Wales can attract a surcharge.

We advise our customers to read this section as palletised deliveries are there to generally to deliver large and heavy items and its best to be prepared so ensure the delivery goes smoothly.

Premium Services are available once the radiators are ready for delivery, we will contact you at this to time to arrange delivery.

Weekday delivery AM/PM +£10

Timed delivery +£25

Saturday delivery AM +£50

Paint Deliveries - Little Greene

Paint deliveries are free of charge via a courier service. Signature is required upon receipt of delivery. Please ensure that you inspect the delivery before signing the delivery notes. Damages must be reported within 24 hours of delivery. 

International deliveries

We provide a bespoke delivery quotation, please feel free to place your order and we will contact you with the delivery costs or alternatively contact us before you place your order for precise delivery costs. 

Palletised Deliveries

Our palletised deliveries will be shipped by an independent haulage company using a HGV. When shipped using this method the haulage company will attempt to deliver pallets as close as possible to your main entrance, usually to the closest hard-standing area. The drivers are not contracted to remove items from the pallet, or to carry items into the customer’s property due to their insurance. Clients should warn the Company if there is restricted access, or gravelled driveways etc. 

Cast iron radiators are very heavy items and usually need 2 strong people to move them, the larger radiators may need more.

The customer must make sure there is someone in the house on the agreed delivery date. We can arrange for the courier to call you 1 hour before delivery. Our standard delivery times are between 9am and 5pm for timed, and/or Saturday deliveries which can be arranged at an additional charge contact our office to arrange. The Company reserves the right to charge a redelivery fee should a redelivery be necessary. Cast iron radiators are very heavy, please ensure that there is sufficient manpower to unload the pallet.

Standard Courier Deliveries

We mostly use TNT for our deliveries. The products we ship using this method are generally able to handled by 1 person. You should be in to take delivery on the agreed date, however if you are out the courier will leave a card for you to contact your local depot to make arrangements.

Please be aware you must inspect the goods for damage prior to signing the delivery notes. If for what reason you are unable to inspect the goods sign the sheet as unchecked.

Standard Door Courier Deliveries

Due to their size and weight, our doors are delivered on a special courier service to avoid any damages. Below are the typical delivery lead times for certain doors:

External/Internal Doors that are in Stock - 5-7 Days

Solid Oak External/Bespoke/Made-to-Measure Doors - 4-6 Weeks

Ledged & Braced Doors - 2 Weeks

In their respective lead times, our couriers will contact you to arrange and book in a suitable delivery date for you.

Be the first to Write a Review for this item!

Are pipework measurements available before delivery?

We can supply approximate measurements as Cast iron radiators are hand assembled and can vary slightly.  We do recommend receiving your radiators prior to the completion of any pipework.

If you need any assistance with this please do not hesitate to contact our sales office.

Which Valves do You Recommend?

We offer two types of valve, thermostatic and manual. Manual valves remain at a fixed temperature that your heating system is working to.  Thermostatic or TRV are adjustable.

If your pipes are coming from the floor you need standard angled valve, if your pipes are coming from the wall a corner valve is required. If you have any questions on your cast iron radiators contact our sales office.

Our Cast Iron Radiators are available in a wide variety of finishes, below is information on the main finishes but if you have a particular finish in mind contact us to discuss.

Primer Finish

Primer is basically an undercoat which needs finishing in order to prevent rusting. It is possible to paint our cast iron radiators yourself using the correct paint, however we do recommend you leave it to us to get a good finish and often its the most cost effective option long term.

Painted Finish

We paint our radiators to achieve a highly durable paint finish. On top of the primer we paint all the sections individually before assembly.  Once the radiators are assembled and pressure tested they are given a final overspray. Our Cast iron Radiators are available in some of our standard finishes such as Foundry Grey, and we can colour match to most of the major paint companies. 

Antique Finish

The Antique Finish is achieved is achieved by layering paint shades and highlighting the detail of the radiator. This gives an aged appearance.  We have some of the standard antique finishes on the site however we can antique most colours if required.

Highlight Polish

Radiators with a highlighted polish are generally finished with a black base coat then the detail is then polished out to leave a polished silver finish to the detail.  We have also done gold and copper highlight finish.

Our specialist team are capable of creating stunning finishes, if you are looking for something different, just ask.

Hand Burnished Effect

The Hand Burnished effect is achieved by polishing the sections back to the bare cast iron. The radiators are then sealed to protect them.  It is a beautiful finish however some maintain is required to keep them looking their best.  Every 8/10 weeks use a polishing cloth with WD40 ensuring your hand burnished cast iron radiators remain free of rust.

 

Click here to go to our radiator finishing page.

https://www.periodhousestore.co.uk/cast-iron-radiator-finishing-options.html

 

cast iron radiators

 

Our Cast iron Radiators come ready assembled upto 20 sections, we can supply larger sizes which may require some on-site assembly.

The radiators are delivered in one peice complete with bleed valves and connection bushes ready for the radiator valves to be connected.

The radiators come with plastic plugs, which need to be removed to install the valves, after the pressure test there may be a small amount of water in the radiator, care should be taken when removing these plugs to prevent damage to your flooring/carpets.

When your radiators are installed, the system should be throughly flushed using a cleaning agent and then dosed with a suitable inhibitor. Sentinel and Fernox both offer a wide selection of products. 

Touch up paint is also supplied to touch up any marks.

Bleed Valves

Bleed valves are used to bleed any air from the radiator, these must be installed using a liquid sealant or PTFE tape.  They will be enclosed with your touch up paint, please ensure that they are not over tightened during installation.

Water Treatment

After the installation of your Cast Iron Radiators your system should be flushed with a cleaning/flushing agent.  The system should then be dosed with an inhibitor.  It is essential this is done correctly and the system PH does not exceed 8.  Systematic testing/re-dosing is required as per the manufacturers instructions.  Both Sentinal and Fernox offer products for accomplishing this.

Failure to carry this out would reduce the life an efficiency of your heating system and invalidate the guarantee.

Further Information is available from Fernox or Sentinal

 

Do I need anything Else ?

All you need to install your radiators is a pair of valves. Period House store has a wide selection of traditional radiator valves which can be viewed below.

https://www.periodhousestore.co.uk/cast-iron-radiator-valves-accessories.html

We recommend using wall stays which further secure the radiators, although they are free standing. We also supply pipe shrouds which cover the feed pipes to the valves and also the hole in the floor.

Our Cast Iron Radiators are delivered using a Palet Delivery Network. It is a kerbside drop, which means that the radiators are delivered on a pallet. The driver will unload the pallet of the delivery wagon and using a pallet truck will wheel it where he can on a flat surface or into a garage.  he does not lift them into the house.  We can give you trackers on the day to give you an idea of time, also some of our customers choose to have them delivered to their builders/plumbers work address if they have one.

When your cast iron radiators are ready our sales team will call you to arrange a delivery day that suits you best.

victorian radiator

Product Handling

Cast iron Radiators are very heavy and you must make sure that you have manpower/lifing equipment when moving your radiators into place.  The most common cause of leaks is the strain on the gaskets when carrying the radiator incorrectly, this is easily avoidable if they are moved correctly with care.

You must ensure that the radiators are only moved in the upright position once removed from the pallet to prevent flexing of the seals.  The most common method is to support the radiator in an upright position between the fins by using a suitable support bar at each end as shown below.

 

Search: